[Update: October 2021 Security Patch] Asus ROG Phone 5s Updates Tracker

Asus decided to add a new device to the ROG Phone 5 series— ROG Phone 5s. The smartphone comes with Snapdragon 888+ 5G SoC coupled with an octa-core processor and Adreno 660 GPU. The smartphone houses a 6.78-inch AMOLED display paired with up to 256GB of internal storage and 16GB RAM. A 64 MP sensor leads the triple-rear camera module and a 24 MP snapper serves video calling and selfies.

Must see: Comparison: Asus ROG Phone 5s vs Red Magic 6S Pro

Note: This is an update tracker and the page will be refreshed with every build released for the device. The updates are placed below in descending order (date wise).

Asus ROG Phone 5s Updates Tracker

• [October 4, 2021]: The ROG Phone 5s is receiving a new update on build number EU_18.1220.2109.131. The package brings few bug fixes for a seamless experience. Read the below changelog for precise information

Changelog

ο Fixed an issue where the volume of LINE & WhatsApp voice messages could not be adjusted
ο Fixed UI related issue with Scenario Profiles in Armoury Crate
ο Fixed the problem of short-term word drop at the beginning of an occasional call
ο Fixed a freeze issue when using Chrome to browse some webpages

• [September 17, 2021]: The new package for the ROG Phone 5s adds current security maintenance and resolves a few bugs. The update is bundled with the firmware version WW_18.1220.2109.126 that brings September 2021 security patch. Also, it addresses some bugs and optimization. Click here to know about the update in detail.


• [September 2, 2021]: Asus is already resolving few bugs for the ROG Phone 5s in a pre-release software update. The update is rolling out through the firmware version WW_18.1220.2107.115. Tap here to know which bugs are being addressed in this build.

As usual, the OTA build is unfurling to different serial numbers in batches. Therefore, it may take a while to reach out to your device. Meanwhile, you can navigate the update via Settings > System updates > System.

Related: [Update: September 2021 Security Patch] Realme X7 Max Update Tracker

Read more »

OnePlus Nord CE gets OxygenOS 11.0.9.9 update!

OnePlus launched the OnePlus Nord CE before they unveiled the Nord 2. It came as an affordable variant of the original Nord. OnePlus has now started pushing a new update for OnePlus Nord CE. The latest update brings the OxygenOS 11.0.9.9 to the device. It brings a new security patch and a few changes to the device. The brand announced the update for the Nord CE through its forum.



The update is now live for the Indian, European, and North American units of the Nord CE. The Indian unit gets the update with the build number 11.0.9.9.EB13DA. While the EU variants get with 11.0.9.9EB13BA and North American variants with 11.0.9.9.EB13AA as the build number.

Changelog of the new update!

Changelog

[System]

• 
  

  Support ambient display screenshot

  
  


• 
  

  Added the Files by Google, find files faster with search and simple browsing

  
  


• 
  

  Improved system stability and fixed known issues

  
  


• 
  

  Updated Android security patch to 2021.09

  
  

The update brings support for screenshots during the Ambient display. It also brings September 2021 security patch for the device. OnePlus has added an additional app, i.e. the Google Files app. They have improved the system stability by fixing some issues. The update is currently rolling out as OTA for a small group of users. OnePlus will start the broader rollout after verifying the update. Head to Settings to check if the update has reached your device. Would you mind sharing the article with your friends who use the OnePlus Nord CE?

Read more »

[Update: September 2021 Security Patch] OPPO F17 Pro update tracker

Back in September 2020, OPPO unveiled a new device to the F series named OPPO F17 Pro. The device features 6.43 inches Super AMOLED display with FHD+ resolution and a peak brightness of 800 nits. The MediaTek Helio P95 chipset powers the device. It pairs with 8GB of LPDDR4X RAM and 128GB of UFS 2.1 storage. It weighs around 164 grams and has a thickness of 7.48mm. The device has a quad-rear camera setup with a 48MP primary sensor. It is followed by an 8MP ultra-wide-angle sensor and two 2MP sensors. On the front, it has two sensors that sits inside the dual punch-hole. That is, it has a primary 16MP Sony sensor that pairs with a 2MP depth sensor. All this is backed by a 4015 mAh battery and supports 30W VOOC fast charging tech.



Note: Please remember that this is an update tracker article and will be revised with the updates of OPPO F17 Pro. 

Oppo F17 Pro Update Tracker

• [September 28, 2021]: OPPO has pushed a new update for the OPPO F17 Pro. The latest update brings the September 2021 security patch for the device. The latest update is live in India and is pushing out as OTA. It comes with the build number CPH2119_11_C.32 and weighs around 564MB. Apart from the security patch, the update doesn't bring any significant changes. So, head to Settings to check if the update has reached your unit.

We will continuously update this tracker when any future updates push out to the OPPO F17 Pro smartphone. So, don’t forget to bookmark this page if you’re one of the owners of the OPPO F17 Pro.

Read more »

Xiaomi TV Stick 4K 2021 (MDZ-27-AA) arrives on FCC listing!

There are reports that Xiaomi is all set to launch the new Mi TV Stick (2021) to mark the success of the Mi TV Stick (2020). The latest version of the TV Stick was spotted on the FCC listing (via GChromecastHub). According to the listing, it carries the model number MDZ-27-AA. Apart from the model number, the specifications and the design are also got revealed via the listing. When it comes to design, it has slight changes and also gets whole new hardware.

Must See: Mi TV Stick launched in India at Rs. 2799, sale starts from August 7

The new Stick pairs an Amlogic S905Y4 SoC, and it couples with a Quad-Core Cortex A35 16500+ DMIPSand an ARM Mali G31 MP2 GPU that is clocked at 850MHz. The new chipset is capable of rendering 4K resolution contents at 60fps on 10bit. The chipset also brings in support for AV1/H.265/VP9 P-2/AVS2 4Kp30, and H.264 codecs. It also supports HDR10/10+, HLG, Dolby Vision, Dolby Atmos and DTS HD. The current generation Mi TV Stick came with support for only Dolby Atmos and DTS HD.



Like every time, the Mi TV Stick will bundle the required accessories when you buy the new Stick. The manual of the new Mi TV Stick tells us that the new package will include the same items such as remote, cable, adapter, and Stick. That said, apart from the new Mi TV Stick (2021) and the regular contents like a 5W power adaptor (5V-1A), an HDMI extender cable, a voice controllable remote for controlling the Stick, you will also be able to find batteries inside the box. That is, you will get two AAA batteries which are used to power the remote.

More about the Stick!

[gallery td_gallery_title_input="Info regarding Mi TV Stick (2021)" ids="119618,119619,119620,119621,119622"]

The remote of the new TV Stick looks similar to that of the current Mi TV Stick (2020). That said, it doesn't have any differences in style, but it gets better speeds. That is, it has better downlink and uplink speeds on the WiFi. It can now reach up to 866.7 Mbps downlink speed using a VHT80 channel and 300Mbps uplink via the HT40 channel. The increase in uplink and downlink speeds tells us that it will carry a new WiFi module. The same will help its users to experience buffer-free streaming while watching 4k content. If you remember, about the previous generation Mi TV Stick, the download speed was limited to 433.3 Mbps and uplink limited to 150 Mbps.

[gallery td_gallery_title_input="Mi TV Stick (2021)" ids="119623,119624,119625,119626,119627,119628,119629,119630,119631,119632"]

The new Stick will use Android TV UI instead of Google TV UI, according to the test reports. Even though there are minor tweaks in the UI. Setting up the Stick for the first time can be done by performing the same steps as before. When the brand launches the product in the market, we expect all the above-said features to be present. There are few reports that suggest the new product will arrive in the market within a few weeks. Since the festive season is already nearing in many countries, we can see the launch happening soon. The new product is expected to compete with the recently launched Realme 4K TV Stick.

Related: Motorola 4K Android TV Stick launched in India via Flipkart

Read more »

[Update: September 2021 Security Patch] Samsung Galaxy A11 update tracker

Back in May 2020, Samsung launched the budget Samsung Galaxy A11 smartphone. The phone features a 6.4 inches PLS IPS display with a resolution of 720 x 1560 pixels. It has an aspect ratio of 19:5:9, a pixel density of 268 PPI, and a screen to body ratio of 81.6%. Underneath the Galaxy A11, it features the Snapdragon 450 chipset.



The chipset pairs with 2, 3, and 4GB of RAM and 32 & 64GB of eMMC 5.1 storage. It gets a triple-rear camera setup with a primary 13MP sensor. The sensor is followed by a 5MP ultra-wide-angle sensor and a 2MP depth sensor. Upfront, it features an 8MP sensor that sits inside the punch hole. The device packs a 4000 mAh battery that supports 15W fast charging tech. When launched, it was running on Android 10 and later got upgraded to Android 11 (OneUI 3.1).

Note: Please remember that this is an update tracker article and will be revised with Samsung Galaxy A12 updates.

Samsung Galaxy A11 Update Tracker

• [September 24, 2021]: Samsung has pushed a new update for the users of the Samsung Galaxy A11 in Argentina, Brazil, Chile, Colombia, Dominican Republic, Guatemala, Mexico, and Peru. The update comes with the build number A115MUBS2BUI1, and the broader rollout of the update to other countries will begin soon. That said, the new update brings the September 2021 security patch for the Galaxy A11 smartphone. Apart from the security patch, the update also brings more than 50 fixes for the device.

Note that we will continuously update this tracker when any future updates push out to the Galaxy A11 smartphone. So, don't forget to bookmark this page if you’re one of the owners of the Galaxy A11.

Read more »

Realme UI 3.0 will officially launch in October 2021

With Android 12 is underway, all the smartphone brands are preparing their next-gen customized skin. Realme is no exception and the company has now officially announced the Realme UI 3.0 during the Realme GT Neo 2 launch event.

Make sure to visit: Download Realme File Manager v12.1.14 App [Old Versions Archive]

Though the Chinese giant has announced the new version of its proprietary interface will debut in October 2021. But, the interface, features and other key details are still confidential. Also, the precise launch date is still undercover.

However, we do have some leaks with us. Realme UI 3.0 is said to come with a major overhaul with UI, animation, features, and much more. The first device to receive the Beta program is likely to be Realme GT. The reason being it is the first device to join the Android 12 developer beta program.

The upcoming Android 12 based Realme UI 3.0 is likely to bring numerous refreshing features such as enhanced notification management, a new user interface, etc ultimately being more user-friendly. Moreover, some minor changes concerning customization are likely to arrive. That implies the user will be able to change the icon shape or put it in different styles, and so on. A new design of Settings and other pre-installed apps like phones, messages, is expected to accompany the package.

You can read all that we know about Realme UI 3.0 by tapping on the button below.

All about Realme UI 3.0- Features, Supported Devices, and more

Read more: Realme 5 Pro & Realme XT grab Android 11 based Realme UI 2.0 update

Read more »

Xiaomi L3A (2112123AG) #psyche certified in EEC

The Chinese manufacturer Xiaomi is once again spotted crafting a new smartphone. A new device has been spotted on the Eurasian Economic Commission (ECC) certification website. As per the listing, the device has the model number 2112123AG.

Make sure to visit: Guide to install Android 12 Emojis on any Rooted Android Smartphone

The latest lineup by Xiaomi is Mi 11 and the recent arrival of the new device is likely to be the Xiaomi L3A. Reportedly, this smartphone will be a part of the Mi 12 flagship. Though the launch date or any other information is not official by the company. But the device's listing on EEC certification affirms the imminent launch.



Unfortunately, ECC certifications do not reveal major details regarding smartphones it certifies. Nevertheless, as per the recent leaks, the Mi 12 will feature a 6.8-inch AMOLED display. The panel will support a punch-hole design with Quad HD+ resolution at 1400x3200 pixels.

Under the hood, the Mi 12 is likely to power an octa-core processor-based Snapdragon 888 chipset. The storage configuration will supposedly be 128GB paired with 8GB of RAM. Further, a 5,000 mAh battery could back up the device over a USB Type C port and it will support wireless charging as well. On the security end, biometric will offer an on-screen fingerprint sensor and face unlocking.

In the optics department, the Xiaomi Mi 12 will probably carry a quad rear camera lead by a 108MP primary sensor. The other lenses could include a 13MP ultra-wide cam, 8MP telephoto snapper, and 5MP sensor to measure depth. On the other side, the punch-hole cutout could house a 32MP selfie snapper.

Read more: Xiaomi Mi 11X India Variant start receiving MIUI 12.5 Enhanced Edition

Read more »

Chrome 94 is rolling out with support for controversial idle detection API

After the successful rollout of Chrome 93, Google has released the Chrome 94 following its four week cycle. However, the latest version had a shorter develoment cycle as it is launched after three weeks instead. Therefore, the set of features this time is not reletively large.

Make sure to visit: Download iPhone 13 wallpapers for any smartphone

However, the Chrome 94 introduces the support for an idle detection API, making it more controversial. This means, the developers will get more signals to understand when the user is idle. The notofications will be triggered for global signals including the interaction with other apps instead of only the current browser window. Also, this API will be enabled by default for all the Chrome 94 developers.

Another addition to Chrome 94 is the VirtualKeyboard API. It gives alll the control to web developers to reshape or replace the virtual keyboard. Presently, the adjustment is operated by User Agent behaviors.

Moreover, Chrome 94 will add support for low-level WebCodecs API. This feature provide access to the media encoders and decoders of existing hardware and software. It will help improve the performance and reduce the latency-sensitive game streaming.

The latest Chrome 94 has started to roll out today. The user will automatically receive the update shortly. In the other case, you can also give it a manual check by heading over to Help > About Google Chrome.

Read more: Files by Google app get “Smart Storage” to automatically free up space on the phone

Read more »

Google adds search filters on Gmail app for Android

In February 2020, Google introduced one of the useful features on the Gmail app called "chips." This is a search filter that allows you to narrow down your search once you enter a keyword. After more than a year and a half, the platform is now getting its overdue functionality.

Make sure to visit: Download new ChromeOS Wallpapers

Once you set a filter, you will see a selection of dropdown menus below the search bar that will further allow you to narrow your search. This section is called Chips where you can select specific names (or addresses) and specific dates (or date range). moreover, you can also select if the mail was with attachment or not, and if it's read or unread.



The chips functionality seems to be rolling out for limited users. Concluding, it's a server-side update for now. Also, flashing APK will not change anything. Thus, we have no other option than wait. As per suggestions, the border rollout will begin in a couple of weeks and will be available for everyone by the end of October.

The users can now perform multiple tasks within the Gmail app apart from tracking their mails. The new in-app calling feature will soon enable the user to call each other on Google Meet. But it can be done inside the Gmail app, not the Meet app. Though the standalone Meet app will get the ability to ring, it cannot create group meetings. To read more about the feature, visit our dedicated tracker.

Read more: Google Photos adopt Material You theme without dynamic color

Read more »